Skip to main content

Scientists Discover Way to Send Information into Black Holes Without Using Energy

Scientists Discover a Soft Ball That Can Roll Up and Down a Perfectly Vertical Wall Without Any External Force!

Rolling a ball down a slope is something we learn about in basic physics. But what happens when that slope becomes a perfectly vertical wall? Normally, a ball cannot roll on a vertical surface without an external force or an initial push. It simply loses contact with the wall and falls under gravity.

However, scientists have now demonstrated something that challenges this traditional understanding. They discovered that a soft rubber-like ball can spontaneously roll down a perfectly vertical surface without anyone pushing it, applying torque, or providing any external assistance.

The secret behind this unusual movement lies in the carefully controlled elasticity of the ball and the surface it touches. By combining two soft materials with specific mechanical properties, researchers created conditions that allow a spherical object to maintain contact with a vertical wall and roll continuously.

The discovery could help scientists develop advanced soft materials, improve our understanding of biological movement, and even inspire tiny robots designed to explore challenging environments.

Why Is Rolling on a Vertical Wall So Difficult?

To understand why this discovery is surprising, we first need to understand the physics of ordinary rolling.

Imagine placing a glass ball on a slightly inclined surface. Gravity pulls the ball downward, while friction between the ball and the surface helps it rotate instead of simply sliding.

As the slope becomes steeper, the ball continues rolling because the surface still pushes against it. This pushing force is called the normal force, and it helps create friction.

However, when the surface becomes perfectly vertical, the situation changes.

On a vertical wall, gravity acts straight downward, while the wall pushes horizontally against the ball. For a rigid, non-sticky ball resting against a perfectly smooth vertical wall, there is no normal force to provide the friction needed to support rolling.

As a result, the ball cannot maintain contact with the wall and simply falls.

Adhesion can sometimes change this behavior. If a rigid ball strongly sticks to a surface, it may remain attached or slide downward. But that does not mean it will roll naturally.

Scientists wanted to investigate whether the situation would be different if both the ball and the surface were made from soft, deformable materials.

The Experiment: A Soft Ball Rolling Without a Push

A research team led by Surjyasish Mitra investigated how soft materials interact when placed in contact with each other.

For their experiments, the researchers used two materials:

  • Polyacrylamide (PAAm): A soft, water-based polymer used to create spherical balls.

  • Polydimethylsiloxane (PDMS): A flexible, silicone-based material used to create the vertical surface.

Unlike ordinary glass or metal, these materials can deform when they come into contact.

The researchers prepared PAAm spheres with different levels of elasticity and placed them against vertical PDMS surfaces with varying mechanical properties.

They then carefully observed what happened when the spheres were released on the vertical surfaces.

The results were surprising.

Under one particular combination of material properties, the soft sphere began rolling downward on the perfectly vertical surface without receiving any external rotational force.

The researchers identified a specific combination of elasticities that made this unusual motion possible.

The PAAm sphere had an elastic modulus of approximately 169.7 kilopascals (kPa), while the PDMS surface had an elastic modulus of approximately 2,242 kPa.

At this combination, the materials produced a work of adhesion of approximately 46.5 millijoules per square meter (mJ/m²).

This balance allowed the sphere to maintain contact with the wall while gradually moving downward.

Interestingly, simply making the materials softer or harder did not produce the same result. Instead, the sphere either remained stuck, slid downward without rolling, or lost contact and fell.

This suggests that successful rolling depends on a delicate balance between elasticity and adhesion.

What Actually Makes the Soft Ball Roll?

The most interesting part of the discovery is how the ball generates the force needed to rotate.

Normally, rolling requires torque, which is the rotational effect of a force. On a vertical surface, gravity alone cannot provide the necessary friction through an ordinary rigid contact.

However, the soft PAAm sphere behaves differently because it changes shape slightly where it touches the PDMS surface.

Unlike a rigid ball that makes contact at a very small region, the soft sphere develops a finite contact area.

As the sphere moves, this contact area continuously changes its shape and diameter.

The researchers discovered that the contact region becomes asymmetrical during rolling.

One side of the contact area behaves like a closing crack, while the opposite side behaves like an opening crack.

In simple terms, imagine pressing a soft rubber ball against a surface. As the ball begins moving, the contact area does not separate evenly. At the front, the materials come together and the contact region grows. At the back, the materials gradually separate and the contact region shrinks.

This difference is closely related to a phenomenon called adhesion hysteresis.

Adhesion hysteresis occurs when the forces required to establish contact between two materials differ from the forces involved in separating them.

Because the front and rear edges behave differently, the pressure distribution beneath the sphere becomes uneven.

This pressure imbalance generates the friction force and rotational torque required to keep the sphere rolling.

In other words, the ball does not need an external motor or an additional push. Its own interaction with the soft surface generates the forces necessary for movement.

The researchers used crack-propagation models and adhesion-hysteresis theories to explain this mechanism mathematically.

Their force-balance and energy calculations also supported the experimental observations, showing that the friction force can balance the sphere's weight and prevent it from simply falling.

How Fast Does the Ball Move?

Although the movement is relatively slow, the researchers successfully demonstrated continuous rolling across multiple experimental trials.

The average speed of the sphere's center of mass varied between approximately 0.46 and 2.52 millimeters per second.

Its average angular velocity, which describes how quickly it rotates, ranged from approximately 0.9 to 2.4 radians per second.

Interestingly, the researchers found that the sphere did not perform perfectly pure rolling.

Instead, it displayed a combination of rolling and slipping, meaning that the sphere rotated while also sliding slightly against the surface.

This behavior is important because it shows that the motion is not simply ordinary rolling under unusual conditions. It is a distinct type of movement governed by the interaction between elasticity, adhesion, and friction.

What Happens If the Materials Are Too Soft or Too Hard?

Another important finding is that this phenomenon only occurs within a particular range of material properties.

When the researchers changed the elasticity of either the sphere or the surface, the rolling motion disappeared.

Depending on the combination, three different outcomes were observed:

  1. Pinning: The sphere sticks to the surface and remains in approximately the same position.

  2. Sliding: The sphere moves downward without developing continuous rolling motion.

  3. Free fall: The sphere loses contact with the surface and falls under gravity.

Only the appropriate combination of elasticity and adhesion creates the pressure imbalance needed for sustained rolling.

This demonstrates how carefully adjusting the mechanical properties of soft materials can completely change the way objects move.

Could This Discovery Help Build Future Robots?

Beyond its unusual physics, the discovery could have practical applications in several fields.

One promising possibility is the development of soft micro-rovers for space exploration.

Future exploration missions may require tiny robotic devices capable of navigating unpredictable surfaces and difficult terrain. Understanding how soft objects maintain contact and move could help engineers design new locomotion systems that do not depend entirely on conventional wheels, motors, or rigid mechanical structures.

The findings could also improve our understanding of dust particles in protoplanetary discs, where tiny particles collide, stick together, and gradually form larger aggregates.

In these environments, rolling interactions between individual particles play an important role in determining how larger structures develop.

More broadly, the research provides new insights into how deformable materials interact with surfaces and how their mechanical properties influence movement.

A New Understanding of Vertical Movement

This experiment challenges the traditional idea that spherical objects cannot spontaneously roll on perfectly vertical surfaces without an externally applied torque.

By combining a carefully selected soft sphere with a flexible substrate, researchers demonstrated that adhesion hysteresis and contact deformation can generate the forces needed to sustain rolling.

Although the discovery does not mean that ordinary hard balls can suddenly roll up walls, it reveals an entirely different way of producing movement through the interaction of soft materials.

Sometimes, the secret to making something move is not adding a motor or applying more force. It is simply choosing the right materials and allowing their physical properties to do the work.

Reference: Surjyasish Mitra, A.-Reum Kim, Boxin Zhao, Sushanta K. Mitra; Spontaneous rolling of a soft sphere on a vertical soft substrate. Soft Matter 2025; 21 (23): 4587–4595. https://doi.org/10.1039/d4sm01490a

Comments

Popular

Scientists Discover Way to Send Information into Black Holes Without Using Energy

For years, scientists believed that adding even one qubit (a unit of quantum information) to a black hole needed energy. This was based on the idea that a black hole’s entropy must increase with more information, which means it must gain energy. But a new study by Jonah Kudler-Flam and Geoff Penington changes that thinking. They found that quantum information can be teleported into a black hole without adding energy or increasing entropy . This works through a process called black hole decoherence , where “soft” radiation — very low-energy signals — carry information into the black hole. In their method, the qubit enters the black hole while a new pair of entangled particles (like Hawking radiation) is created. This keeps the total information balanced, so there's no violation of the laws of physics. The energy cost only shows up when information is erased from the outside — these are called zerobits . According to Landauer’s principle, erasing information always needs energy. But ...

Black Holes That Never Dies

Black holes are powerful objects in space with gravity so strong that nothing can escape them. In the 1970s, Stephen Hawking showed that black holes can slowly lose energy by giving off tiny particles. This process is called Hawking radiation . Over time, the black hole gets smaller and hotter, and in the end, it disappears completely. But new research by Menezes and his team shows something different. Using a theory called Loop Quantum Gravity (LQG) , they studied black holes with quantum corrections. In their model, the black hole does not vanish completely. Instead, it stops shrinking when it reaches a very small size. This leftover is called a black hole remnant . They also studied something called grey-body factors , which affect how much energy escapes from a black hole. Their findings show that the black hole cools down and stops losing mass once it reaches a minimum mass . This new model removes the idea of a “singularity” at the center of the black hole and gives us a better ...

How Planetary Movements Might Explain Sunspot Cycles and Solar Phenomena

Sunspots, dark patches on the Sun's surface, follow a cycle of increasing and decreasing activity every 11 years. For years, scientists have relied on the dynamo model to explain this cycle. According to this model, the Sun's magnetic field is generated by the movement of plasma and the Sun's rotation. However, this model does not fully explain why the sunspot cycle is sometimes unpredictable. Lauri Jetsu, a researcher, has proposed a new approach. Jetsu’s analysis, using a method called the Discrete Chi-square Method (DCM), suggests that planetary movements, especially those of Earth, Jupiter, and Mercury, play a key role in driving the sunspot cycle. His theory focuses on Flux Transfer Events (FTEs), where the magnetic fields of these planets interact with the Sun’s magnetic field. These interactions could create the sunspots and explain other solar phenomena like the Sun’s magnetic polarity reversing every 11 years. The Sun, our closest star, has been a subject of scient...